Recessed square spotlight in die-cast aluminium; 2 lamps; surface gold; 30° tiltable; installation without tools in mounting set due to patented ball catch system; rectangular installation housing; with trim silver-grey; suitable for ceiling thickness of 2-25 mm; passive cooling of the LEDs through improved heat sink geometry; with COB (Chip on Board) technology for maximum efficiency; no appearance of multiple shadows; light colour 4000 K; binning initial MacAdam ≤ 2 SDCM; CRI ≥ 90; min. 80% of luminous flux after 50000 operating hours; energy efficient LEDs with high CRI; incl. high quality lens system; precise radiation characteristic with 62° beam;    degree of protection from below IP40 (from above IP20); PC2 220-240V; incl. converter, non dimmable; through wiring connection box, 3-pole or 5-pole, available as an accessory; accessories are listed separately;  light source replaceable by an authorized professional;   control gear replaceable by an authorized professional;

General: Ceiling, Recessed, tilt max 30°, gold, Mounting set silver-grey, RAL260-M, front IP40, back IP20, 4160 lm
LED: 4000 K, CRI ≥ 90, L80 / 50000 h, initial MacAdam ≤ 2 SDCM , Rg: 97, Rf: 90, R{1-15}: 89, MR 0.81, MDER 0.74
Optical: super wide flood, beam angle 62°, UGR < 25, PstLM ≤ 1.0, SVM ≤ 0.4
Electrical: non DIM, 58 W, inset 24.8 W, total insets 50 W, PC2 220-240V, 72 lm/W
Physical: trim, length 218 mm, width 118 mm, height 95 mm, 0.56 kg
Cutout: length 210 mm, width 112 mm, min. ceiling thickness 2 mm, max. ceiling thickness 25 mm, recessed depth 100 mm

048-2730619X
048-279931G
002-90774